Set up ADI with Oil Separator
You may be able to make essential oil with ADI from those high oil content herbs, like lavender bauds, rosemary leaves, etc. If you want to separator the oil from its hydrosol, it is simple.
What do you need?
A silicon tubing (ID 12mm, 2 feet long as recommended, but actual length depends on how far away your ADI is from separator.) and a clamp (12mm diameter, as shown in the following image).
Steps:
1, Connect the silicon tubing on the outlet of ADI, which is underneath the condenser.
Silicon tubing on ADI outlet with a clamp.
2, Lead the silicon tubing into the inlet of oil separator. The oil separator set need to be placed at a lower place relative to the ADI outlet.
Oil separator is placed lower than ADI outlet.
Watch this video to see how to connect oil separator with ADI.
You are all set for setting up oil separator with ADI.
Place a container at the hydrosol outlet to collecting hydrosol during the distillation.
How to use oil separator